Specifications

Specifications for each PITBULL® PUMP are listed below. Click on a link to view your chosen document.

Submersible Pumps

The submersible pump uses either the AP200 control panel or the EP250 control panel. For more information on each panel, see the links at the bottom of this page.

S2C/S2S - 2" Submersible Carbon/Stainless Steel Pump

S3C/S3S - 3" Submersible Carbon/Stainless Steel Pump

S4C/S4S - 4" Submersible Carbon/Stainless Steel Pump

SH4C/SH4S - 4" Submersible Carbon/Stainless Steel Pump High Flow - Expanded Capability

Non-metallic Submersible Pumps

The non-metallic pump uses either the AP200 control panel or the EP250 control panel. For more information on each panel, see the links at the bottom of this page.

S2V - 2" Submersible, non-metallic Pumps

S3V - 3" Submersible, non-metallic Pumps

S4V - 4" Submersible, non-metallic Pumps

Hot Condensate Return Pumps

The Hot Condensate Return Pump uses an AP200C Control panel. This panel operates identically to the AP200 but features higher temperature components.

C2C/C2S- 2" Hot Condensate Return Pump

C3C/C3S- 3" Hot Condensate Return Pump

C4C/C4S- 4" Hot Condensate Return Pump

Transfer Pumps

The transfer pumps always use the AP200 control panel (unless otherwise recommended by our engineering staff for an individual application). For more information on the AP200 control panel, see the link at the bottom of this page.

T2C/T2S - 2" Transfer Carbon/Stainless Steel Pump

T3C/T3S - 3" Transfer Carbon/Stainless Steel Pump

T4C/T4S - 4" Transfer Carbon/Stainless Steel Pump

Filter Press Pumps

The Filter-Press Pumps always uses the DP220 control panel. For more information on theDP220 control panel, see the link at the bottom of this page.

F2C/F2S - 2" Sludge/Filter-Press Feed Pump

F3C/F3S - 3" Sludge/Filter-Press Feed Pump

F4C/F4S - 4" Sludge/Filter-Press Feed Pump

Custom Pumps

Challenge us to solve your pumping problems! Not only do we offer a wide range of standard pump configurations, but we can also develop a custom pump configuration to fit just about any specific application. We can even configure the PITBULL® as an oil water separator or add a SAM - Solids Agitating Mixer to stir up sediment in sludge and slurry applications. 

Custom Pumps

Oil Water Separation Concept

SAM - Solids Agitating Mixer

Onboard Oil Cleanup and Recovery System

Control Panels

We currently have three different panels used for different applications and different pumps. 

Please see the O & M Manuals for each below:

AP300 - AP300 All-pneumatic panel for Submersible Pumps

AP200-M-H - AP200 All-pneumatic panel for Submersible and Transfer Pumps   including M and H versions

AP200 - All Pneumatic Control Panel

EP250 - Electro-Pneumatic Control Panel

DP220 - Sludge & Filter-Press Control Panel

Interested in knowing if the Pitbull Pump will solve your pumping dilema?  Click on this link DATA SHEET and fill out the form to the best of your ability.  Hit the Process Application form and our engineering department will review and make a recommendation specific to your needs.